Before laying fiberglass grilles, the specifications and load-bearing capacity of different fiberglass grilles vary. Then purchase and install suitable fiberglass grilles according to actual needs.

1. Before laying (installation), prepare the drainage channel and embed the drainage pipes. The outer width of the drainage channel should not exceed 5% of the width of the fiberglass grating, the inner width should be less than 10% of the width of the fiberglass grating, and the inner width should be greater than 10%. Grille has a large load-bearing capacity, but a smaller drainage capacity will decrease, so controlling the proportion is important

2. After the drainage channel is unobstructed, the fiberglass grating is officially laid. The grating is arranged according to the requirements, and the inner opening of the drainage channel is surrounded by the grating, with an equal distance from the outer opening of the drainage channel to ensure even stress. Later stage.

3. Fix the glass grille and fill the gaps with 705 glass adhesive around it. After the adhesive dries, cover the gaps with 302 cement.

4. After treatment, check whether the laying is in place and conduct stress tests to ensure the completeness of the project.