Various types of connection features of fiberglass grilles:

1. L-shaped connection: used for special positioning connections of medium loads and supports.

2. M-shaped connection: fixed and stable, used for positioning connection between grille brackets and brackets.

3. C-type connection: used for connecting the edges of two unsupported grilles, with integrity.

Fiberglass grating protection:

1. During use, surface dust and dirt can be cleaned with detergent without the need for other maintenance methods.

2. During the application process, direct contact with various open flames and high temperatures such as welding and oxyacetylene flames should be prevented during the repair of steel structures and equipment.

3. During the application process, it is necessary to prevent the extension, collision hazards, and paint pollution of various steels, steel tools, and objects during the repair of steel structures and harmonious equipment.

Fiberglass grating equipment:

1. Refer to the single grid standard of fiberglass grating, adjust the trench standard as much as possible, so that the edge of the grating after cutting is a closed door, adhere to the integrity of the cells, and achieve a beautiful and elegant equipment function.

2. Fiberglass grating is supported on a rare 50mm wide concrete foundation, and the gap between the grating and the concrete is 3-6mm.

Route equipment:

1. The supporting edge of the fiberglass grating is supported on the steel beam to a rare 40mm width. The equipment space between the grating is 6mm, and the equipment space between the grating and the concrete column is 10mm.

2. M-shaped or L-shaped firearms should be used to fix the fiberglass grating and the supporting steel beam. Each grating should have at least 4 pieces, and C-shaped fixtures should be used to connect the edges of two adjacent non supporting gratings. At least 1 piece should be used for every 1.8m long center.

Staircase equipment:

1. The fiberglass grating step should be installed inside the step structure or on the bracket. The structure or bracket can be made of either steel or fiberglass.

2. The fiberglass grating steps are 3-6mm away from the structural ground, and each step is fixed with 8 fixing fixtures, with 2 fixed at each corner. It can also be directly fixed to the bracket.