Car wash room fiberglass grille fixture

Three standard fixtures, M-type, L-type, and C-type.

Selection of fiberglass grille for car wash room

1. Dimensional tolerance range for whole panel molded grille:

Length direction: ± 3mm

Width direction: ± 3mm

Thickness direction: ± 1.5mm

Grid warping: The length direction shall not exceed 2.5mm per meter; The width direction shall not exceed 4.5mm per meter.

2. Dimensional tolerance range for cutting and processing molded grilles:

Length direction: ± 5mm

Width direction: ± 5mm

The diameter tolerance range for cutting circular grilles is: ± 3mm

The benefits of using fiberglass grilles in car wash rooms

Car wash staff do not need to wear boots. Because when the car wash room is covered with fiberglass grilles, the water flows away directly and does not splash onto the feet of the staff. Especially in the cold winter weather, choosing fiberglass grilles for the car wash room is a good choice.