1. Selection of cutting machine: The fiberglass grating can be stopped by a ceramic disc or gold sand disc cutting machine.

2. Selection of flow support machine: When using a large cutting machine, the flow should be good to prevent the grating and cutting machine from moving.

3. Insurance precautions: Before cutting, operators should wear protective eye masks, bed covers, finger joints, and work clothes. Stop cutting when it is breathable and crystal clear.

4. How to use fiberglass grating: After cutting the bottom of the grating, it can be used up to reduce the occurrence of fragments.

5. For cutting stop review: Before cutting, please consider the degree of saw marks on the saw blade. The length and width score of the grid after cutting must be -6mm~0mm; The circular diameter must be between -9.5mm and 0mm.

6. After the implementation of the task solution: The name of the grating cutting needs to be coated with resin, and the resin needs to be higher than the resin used for the grating title. For example, o-benzene type gratings are brushed with m-benzene resin to prevent erosion by external glass fiber media.