Advantages of fiberglass grating:

1. Overall: Continuous prestressed fiberglass roving and resin impregnation with high-pressure injection.

2. Interleaving: The cross shaped fabric yarn is formed to enhance load-bearing ability.

3. Power transmission: The rods are bundled together, the bundles are stacked and compressed, with good load-bearing capacity and excellent power transmission.

4. Lubrication: Beautiful and easy to wash.

5. Anti slip: Anti slip sand can be added (anti leakage and anti slip boards can be laid together).

Our company can customize products according to customer requirements, such as different hole sizes, different external dimensions, and different load requirements. Can maximize customer satisfaction and minimize losses caused by cutting, thus saving customers costs.

Fiberglass grating colors: gray, red, yellow, red, other colors can be customized.

25mm thick: suitable for general drainage ditches, with a width and inner diameter of no more than 30cm, capable of bearing about 2 tons of vehicle pressure.

30mm thick: suitable for drainage ditches and car washing stations, but the support spacing below (horizontal and vertical) should not exceed 30cm, which can support vehicles up to 2.5 tons.

38mm thickness and thickness: The most cost-effective standard for car washing stations, with a support interval (horizontal and vertical) of 30cm as the optimal. The maximum safe bearing capacity can reach 5-7 tons, and the maximum uniformly distributed destructive bearing capacity can reach 30 tons. The service life is relatively long.

50mm thick: suitable for large car wash shops and chemical plants, with the highest cost-effectiveness and a service life of 8-9 years.