The appearance of FRP grating should be flat, smooth, and have beautiful colors, which is the primary requirement.

2. Raw materials: Many consumers are not familiar with the raw materials used for FRP grilles. The main raw materials for fiberglass grating are resin and fiberglass. The filler is calcium powder, usually in a ratio of 1:1:1. High quality resin, typically unsaturated phthalate resins 196, 191, 3301, and FRP grilles made from this resin are usually smooth. If inferior resin is used, the product will become dull and porous after coming out. The most important thing is that it is prone to fracture, has poor strength and toughness, and has a relatively short service life.

3. Determine what needs to be done to use FRP gratings, that is, clarify their usage goals. If the car wash shop has purchased a grille panel, they are prepared to use it as a load-bearing plate for the car wash.

The purpose of determining FRP gratings is to determine the size and specifications of the gratings. Through the introduction of the manufacturer, I have gained a certain understanding of the grille. For example, when washing a car, you can choose a 2.5cm thick grid plate or a 3.8cm thick grid plate. In electroplating equipment factories, 2.5cm thick mesh plates are usually used. In sewage treatment plants, chemical plants typically use a 3.8 centimeter thick grid plate.

5. After selecting the appropriate FRP grating thickness, calculate the grating size. For example, in a car wash. The majority of the dimensions of the car wash area are 1.220m * 2.440m, and the size of the FRP grille is 1.220m * 3.60, which can be cut and put into use.

6. Use Taishi raw materials to manufacture grid panels that meet the requirements. When using fiberboard in chemical plants or sewage treatment plants, resin with strong corrosion resistance should be used for production.