We have been talking about the industry application of fiberglass grating panels and the advantages of fiberglass application. But many people still have certain incentives for the practical application of fiberglass grating panels. In response to this, the editor will introduce the application of examples to us. Below is an explanation of the application of fiberglass grating panels for balconies and stairs.

1、 Balcony equipment

1. The grid support edge is supported on the steel beam with a maximum width of 40mm. The equipment gap between the grid and the grid is 6mm, and the equipment gap between the grid and the concrete is 10mm.

2. M-shaped or L-shaped tenons shall be used to suspend activities between the grating and the supporting steel beam, with a maximum of 4 joints per piece. C-shaped tenons shall be used to suspend connections between adjacent non supporting grating edges, with a maximum of 1 joint per 1.8m long center.

Trench equipment

1. Refer to the single grid size of the grille and adjust the trench size as much as possible to make the surrounding area of the grille open after cutting, maintaining the integrity of the grille and ensuring the effectiveness of the equipment.

2. The grid is supported by a maximum width of 40mm on the concrete surface, and the gap between the grid and the concrete is 3-6mm.

2、 Ladder equipment

1. The grating steps should be installed inside the step structure, which can be made of glass bricks or other structures.

2. Each corner of the grid step is movable with 2 M-shaped fasteners.

Through the examples above, we have gained a certain understanding of the use of fiberglass grilles.