Water treatment: maintenance walkways, sewer cover plates, large containers, washers, trash racks, flow channels, biochemical water treatment pool hangers, ventilation windows, stairs, cooling tower operation platform paving

Chemical plant: stair treads, operating channels, guardrails, double-layer floors, trench covers, filter grilles

Petroleum Industry: Offshore Oil Channels

Textile factory: replacing metal grilles, wooden channels and covering cement floors, beside dyeing tanks, floors, and adjacent valves

Power plant: Chemical water tank trench cover plate, waste water tank, etc

Metal surface treatment: in acid solution areas, around machines instead of wooden floors, around highly corrosive containers, in electroplating line corridors, on double-layer floors

Marine food processing plant: slippery appearance and other harsh environments, on ships

Transportation industry: channels, ship decks, walkways, military minesweepers, stair planks

Beverage industry: stair treads, replacing expensive stainless steel, and load-bearing flooring

Pulp and processing plants: stair treads and floor slabs, floor walkways, and areas with high humidity

Electronics industry: trench cover plates, acid washing workshops, anti-static (anti-static grid) and high cleanliness workshops

Meat processing plant: corrosion-prone floors, stairs, slippery floor workbenches, and stair treads

Car wash room/car beauty shop: car wash room drainage board, parking space, car wash room gutter cover plate

Crane: On the walkway of a 3-meter or 6-meter long crane

Other: corrosion-resistant shelves, decoration, square fountains, scaffolding, civil construction facilities, animal husbandry fences, and double-layer flooring.

Operation channels: Many chemical plants have many operation channels, using fiberglass grating as the operation channel for pavement material production. It is corrosion-resistant, does not require paint, does not require protection, and has a long service life, which can be used for 15 to 20 years. Lightweight, compared to steel, it reduces the weight by three-quarters, so there is no need to use lifting equipment during installation, making it more suitable as an operating channel to support the equipment. The opening and cutting of fiberglass grating is very convenient. The use of an arc cutting saw can easily open holes to meet the requirements of the device, and it will not cause changes in the mechanical function of the grating due to the opening, let alone the scattering of the grating. For mobile operating channels, the use of lightweight fiberglass grilles is more suitable. In addition, proper planning to make fiberglass grilles have appropriate elasticity can reduce the fatigue of long-term workers on them, improve work efficiency, and thus be an ideal material for artificial channels.

Walkways: Factories (such as chemical plants, steel plants, etc.) often have many walkways, some of which are passages between equipment, and some are used for inspection. These walkways are usually welded with round steel, and due to corrosion, anti-corrosion coatings are often applied every year. Using FRP grilles to make these walkways, without the need for protective treatment, can not only make the walkways maintain a bright color for a long time, but also make the walkway structure lightweight. Coupled with an anti slip sanding surface layer, it is the best choice for outdoor walkways in northern ice and snow seasons.

Trench cover plate: many electrolysis workshops in chemical plants and smelters, as well as chemical treatment workshops in power plants; The pickling workshops of electroplating factories, battery factories, and machinery factories; Pharmaceutical factories, printing and dyeing factories, salt mines, etc. all have many underground ditches, which are mostly corrosive liquids. Traditional ditches use angle steel, flat iron welded grids, cast iron grids, cement cover plates, etc. These materials are not corrosion-resistant and can be damaged in a few years or months, resulting in fragmented appearance in the workshop. The use of FRP grids can effectively deal with corrosion problems and facilitate sewage discharge into the ditch, It is also convenient to investigate the situation inside the trench at any time.

Offshore oil channels: Traditional offshore oil channels often use steel plates as paving materials. The harsh climate of the ocean and the corrosion of the sea water form severe corrosion, adding unsafe factors. FRP grids have been successfully used in this harsh environment abroad, reducing the weight by three-quarters, making the treatment of foundation support and other components simpler. Through reasonable planning, the total cost of the channel can also be reduced.

Sewage treatment: In terms of sewage treatment, FRP grilles can be used as paving materials for operating channels under cooling towers, as hanging fixtures for cremation water treatment tanks, and as maintenance walkways for sewage treatment plants.

Stair treads: The production equipment of chemical and petrochemical plants often has several or even dozens of floors, requiring the use of many stairs. Traditional stairs welded with steel plates or round steel can be easily damaged in these corrosive environments. The stair treads provided by our company not only deal with anti-corrosion issues, but also have anti slip and wear-resistant properties.

Fence: For medium and high voltage equipment in factories, fences are generally required around large storage tanks according to requirements. Runlin grilles are ideal materials for use in these places due to their insulation, corrosion resistance, bright colors, and convenient installation. Additionally, it can also be used for windows, fences, etc. in chemical factories with severe corrosive environments.

Top filling channel: The walkways and channels on the top of storage tanks are often severely corroded, with rust stains everywhere, which is daunting. Channels and walkways that have suffered severe corrosion often have hidden dangers of accidents. The tank top channel made of FRP grating can completely change this situation.

Anti corrosion shelves: Battery factories have many shelves for storing batteries, and using fiberglass shelves can effectively solve the problem of traditional shelves not being corrosion-resistant.

Double layer above ground: In many corrosive workshops, such as the pulp refining workshop of a pulp mill and the electroplating workshop of an electroplating plant. The traditional operation method involves operators, products, waste residue, and waste liquid being placed on the same ground, which has many inconveniences and can easily cause damage to the anti-corrosion ground. Unlike the concept of solid ground, the double-layer grid ground is composed of FRP grids on the upper layer and building foundation on the base layer. Operators walk and work on the grid surface layer, and products can be placed on the grid surface layer, while waste liquid and waste residue can be discharged to the base layer substrate, After the homework is completed, a strong water spray can be used to flush and remove the piled up objects on the ground, which not only facilitates the operation of workers but also facilitates management personnel to inspect the work on site.

Boat deck: used for boat deck or footbridge data, which can greatly reduce the weight of the deck, increase cargo capacity, and avoid the invasion of ship borne media and seawater. Its excellent diamagnetism is more suitable for use on minesweepers.