Fiberglass cover plate is a common building material, which is made by mixing resin and glass fiber. It has superior performance, especially light weight, and easy installation, which is very popular among customers. Therefore, this article will explain the construction and installation plan in detail by the fiberglass cover plate manufacturer.

Before the construction of fiberglass cover plates, the site should be cleaned and cleared to ensure that the laying ground is clean and dry. Then, measurement and cutting of materials can be carried out. The cutting work is relatively simple, only requiring manual cutting tools or small electric cutting tools. It is important to note that there must be sufficient clearance between the edges and the installation site. When cutting, the grille should be cut and processed reasonably according to the size and installation requirements to ensure good economic benefits without affecting the internal performance of the grille. The cutting end face needs to be coated with resin to ensure that its corrosion resistance is not affected. Cutting is divided into linear cutting and curved cutting. Linear cutting uses ceramic disc or diamond disc cutters for on-site cutting, and even ordinary steel saw blades can be used. Curved cutting refers to the cutting of grid openings, arcs, and other curved lines, which can be done using electric saws or steel saws equipped with metal cutting blades.
In addition to cutting, it is also necessary to drill holes. Holes above 12mm can be drilled with a common drill Fried Dough Twists drill, and small holes can be drilled with a portable electric hole processing machine or a common electric hand drill. Additionally, handheld angle grinders, grinding machines, regular files, and sandpapers can be used for polishing. During the operation, it should be noted that this material cannot be turned or tapped. However, any cutting during the cutting process will not change the mechanical properties of the grille, nor will it cause disassembly or other consequences. Therefore, everyone can operate with confidence.

When installing fiberglass cover plates, it is necessary to ensure that the bottom of the product is truly leveled; The two cover plates are connected to each other using fiberglass fasteners and connectors of the same material; If there are requirements for the sealing of the grille cover plate, corresponding adhesive should be used in conjunction with it; During the installation process, it is necessary to prevent the vehicle from crushing it; Pay attention to the size of the bottom support span and the number of cross bracing brackets to ensure overall stability. The maintenance work of the product is very simple, usually consisting of some cleaning work, without the need for frequent inspection and maintenance.
The above is a detailed explanation of the construction and installation plan by the manufacturer of fiberglass cover plates. You can refer to it when carrying out the construction and installation of fiberglass cover plates. In addition, you can contact us at any time to learn more about fiberglass cover plate information.